AUX IN
channel 1 has an 1/8” auxiliary input . This stereo input will defeat the regular
1⁄4”/XLR combo INPUT jack on channel 1 when in use, and the EQ will affect
whatever you plug into the aux in.
5-BAND EQUALIZER
A little goes a long way, so start with all dials set to the 12:00 (neutral) position.
The EQ ranges from LOW (80Hz) to HIGH (7.2kHz). Each EQ knob should be
thought of as a volume control that increases or decreases the volume level of its
designated frequency range. Because the sound will vary from room to room,
it is advisable to experiment with positioning the amp in conjunction with the
EQ settings. For example, for the best bass response your Bud should be set
on the floor.
BRIGHT SWITCH
Channel 2 has a bright switch. When turned on, the bright switch increases the
higher frequencies of the signal before going to the EQ. Note: If the input gain is
set to 9:00 or below, the bright switch will have little effect.
