background image

                                                                                                                             

Instruction Manual for HT026C LED Underwater Light 

 

 

 

 

 

 

Manufacturer: Hentech Technology Development Co., LTD 

Add:  Xinmin  Industrial  Zone,  Longzhou  Road,  Lunjiao  Town,  Shunde  District, 

Foshan City, Guangdong Province, China 528308 

Telephone: +86-757-27332335/27332338/27332339 

Fax: +86-757-27332330 

Website: http://www.hentech.ca 

 

                                                                                                                             

 

IMPORTANT: This manual includes essential information on the safety measures to be 

implemented for installation and start-up. Therefore, the installer, as well as the user, 

must read these instructions before beginning installation and start-up. 

 

Technical Specification 

Standard input voltage: 12V AC/DC (Range: 12~18VAC or DC) 

Standard input watt:   

RGB / White   

2W / 2.3W (36 Normal LED) 

Use life: 60,000 hours 

16 programs with Synchronization capability 

 

Dimensions: 

 

 

 

Summary of Contents for HT026C

Page 1: ...330 Website http www hentech ca IMPORTANT This manual includes essential information on the safety measures to be implemented for installation and start up Therefore the installer as well as the user must read these instructions before beginning installation and start up Technical Specification Standard input voltage 12V AC DC Range 12 18VAC or DC Standard input watt RGB White 2W 2 3W 36 Normal LE...

Page 2: ...s necessary The manufacturer is not responsible in any circumstances for assembly installation or start up of any electric components which have been inserted or handled at locations other than its own premises 16 Programs of RGB LED Bulbs 1 White sun white 2 Red one color red 3 Green one color green 4 Blue one color blue 5 Green blue fixed color green blue 6 Red green fixed color red green 7 Blue...

Page 3: ...en it is turned on again To achieve synchronization confirm all lamps are installed correctly on the same switch after they are powered off for more than 20 seconds switch on and switch off continuously three times and then finally turn them on again They will all go to program 5 Now you can select a program for them by switch off and on within 8 seconds Alternatively we recommend using our option...

Page 4: ...erials and workmanship for a period of one year from the date of purchase This warranty does not cover the fixture becoming damaged due to misuse accidental damaged improper handling and or installation and specifically excludes liability for direct incidental or consequential damages ...

Reviews: