①
、
Lubrication
：
When the tool is running, the chain is automatically lubricated
；
Check the amount of remaining oil in the oil tank through the oil volume inspection
window. When the amount of oil is lower than "min", the oil tank shall be refilled. Please
remove the oil cap from the mouth of the oil tank, and the oil tank capacity is 120mL.After
filling the tank, be sure to unscrew the cap provided on the chain saw.
Notice
：
---
When first filling the chain saw or refilling the empty tank, fill to the bottom edge of the
lubricator neck.
---
Do not use lubricating oil or volatile oil containing dust and particles.
---
When pruning branches, use vegetable oils. Trees may be damaged by the use of
mineral oil.
---
Do not overexert force on the chainsaw while pruning the branches.
---
Before starting cutting, make sure the attached fuel tank cap is tightened in place.
Hold the chainsaw at arm's length from the tree. Start the chain saw and wait until
the chain is fully lubricated.
Pruning/cutting wood:
Notice
：
---
Keep all parts of the body at a distance from the chainsaw while the motor is working.
---
Hold the chainsaw with both hands while the motor is running.
---
Do not extend your hand too long during operation. Please stand on both feet and
keep balance at all times.
Contact the lower guide plate with the branches before opening the chainsaw switch.
Starting cutting at the bottom of the guide plate without contact with the branches may
cause the guide plate to sway, causing injury to the operator.
3
