MOUNT THE DOUBLE-SHOULDER STRAP AND
HOLDING THE MACHINE
Put the double-shoulder strap on your body and insert the two parts of the
strap buckle into each other until a click is heard (Fig. R-1). Align the hook of hip
pad into hole of the tubing clip fixed on the shaft, and press the shaft down softly
(Fig. R-2 & R-3 & R-4).
Hold the line trimmer with both hands on the right side of your body (Fig.
S). The trimmer head or blade should be parallel to the ground at a proper cutting
distance without the operator bending over.
Releasing the brush cutter can be achieved in two ways;.
Release the strap buckle (Fig. T) or press the hook of the strap and take it apart
from the tubing clip fixed on the shaft (Fig. R-2).
WARNING: When emergency occurs, take it off from your shoulder immediately,
no matter what way the strap is in. Releasing the strap buckle(Fig.T) and both
hands taking off your shoulders at each side is a quick release method.
WARNING: You should not use the single-shoulder strap and double-shoulder
strap simultaneously.
STARTING/STOPPING THE BRUSH CUTTER
To Start
Press down the lock-off lever and hold it in that position. Depress the trigger to
start (Fig.U).Different pressure on the trigger results in different rotating speed of
the cutting unit. If necessary, adjust the
speed limiting lever to set the maximum speed.
NOTICE: The speed limiting lever can also be preset to limit the trigger travel.
To Stop
Release the trigger.
NOTICE: The motor runs only when the lock-off lever and trigger are both
pressed.
WARNING: Always remove the battery pack from the line trimmer during work
breaks and after finishing work.
Summary of Contents for H36DCG120A01
