machine to overheat or become damaged.
WARNING
: Never use metal-reinforced line, wire, or rope, etc. These can break
off and become dangerous projectiles.
When the cutting line breaks from the line outlet or the cutting line is not released
when tapping the trimmer head, follow the steps below:
1. Remove the battery pack.
2. Press the release tabs on the trimmer head cover and remove the trimmer
head cover by pulling it straight out (Fig. H-1 & H-2).
3. Remove the broken cutting line from the spin base.Reload new lines as above.
4. Insert the spin base, with one hand holding the trimmer head base, use the
other hand to grasp the trimmer head cover and align the tabs on the trimmer head
cover with the holes in the trimmer head base(Fig. X-1); press and rotate the
trimmer head cover left and right until the tabs lock with the trimmer head
base(Fig.X-2).
USING WITH 3-TEETH METAL
WARNING: To cut wild growth and scrub, lower the rotating 3-teeth blade down
onto the growth to achieve a chopping effect. Use the brush cutter like a scythe
(sweep it to the right and left)at ground level. Do not use the cutting unit above the
waist height.
WARNING: The higher the cutting unit is off the ground, the greater risk of injury
from cuttings being thrown sideways.
WARNING: When cutting young trees or other woody materials up to 2cm in
diameter, use the left side of the blade to avoid blade thrust situations. Do not
attempt to cut woody material with a larger diameter, since the blade may catch
or jerk the brush cutter forward. This may cause damage to the blade of the brush
cutter or loss of control of the brush cutter, resulting personal injury.
WARNING: Improper use of a blade may cause it to crack, chip, or shatter.
Thrown parts may seriously injure the operator or
bystander. To reduce the risk of personal injury, it is essential to take
the following precautions:
Avoid contact with hard or solid foreign objects such as stones, rocks, or pieces
of metal.
Never cut wood or shrubs with a stem diameter of more than 2 cm.
Summary of Contents for H36DCG120A01
