background image

www.heraled.com

2

Safety Information

Warranty

Caution – unplug the power supply from the main power before connecting any cables as this can damage the products.

Caution – avoid looking directly into the led light source at close range for your own safety.

Any people installing this product should comply with local standards and regulations and must be qualified for the handling of

 

electrical equipment

.

•  Do not attempt to install or use the product until installation instructions and safety labels are fully understood. 
    This product is designed for indoor and outdoor usage.
•  Ensure product operates within the specified temperature range. 
•  Do not attempt to open the product.
•  Do not use the product if the power cables are damaged.
•  Only use product for specified voltage.
•  Always maintain connection to ensure waterproofing.
•  If the product has been subjected to drastic temperature variances, for example, following transportation, 
    do not connect the fixture until it has reached room temperature, as moisture condensation may cause electric 
    shock and product damages.
•  When installing the products and system power supplies, please ensure they will not be exposed to moisture and extreme heat 
    (and direct sunlight for outdoor products). Besides, keep a clean operating environment for the fixtures and system power supplies.

.

•  

Any non-compliance of the Installation  Guide  will void the Hera warranty.

Hera warrants    the products for a period of  five (5) years from date of purchase, provided that 
the purchased items are used under the conditions stated in this user manual.

Warning

Please study this Installation Guide throughly and check the latest Technical Specification Sheets available from the 
our website  www.heraled.com before setup.

Marking

DMX

RDM

67

Risk of

Electric

Shock

Do Not Open

Products 

Warning!

Refer to User

Manual. 

 Not Suitable

 for Household Room 

Illumination

 

DIRECTIVE 2012/19/EU 

Waste Electrical 

and Electronic Equipment

 

MPX6 DYNAMIC WHITE SERIES

Summary of Contents for MPX6 DYNAMIC WHITE SERIES











Reviews: