HERCULANO
– ALFAIAS AGRÍCOLAS, S.A
.
APARTADO 1 – 3720-051 Loureiro OAZ – Oliveira de Azeméis – Portugal
Tel.: (351)256 661 900 Fax: (351)256 692 497 e-mail:
dep.comercial.her@ferpinta.pt
Internet: www.herculano.pt
29
12.1.
DAILY
Check:
- Tyre pressure
(See: 8.1 – TECHNICAL SPECIFICATIONS: Tyre dimensions and pressures / Wheel tightening torque)
- Possible oil/air leaks in hydraulic/pneumatic circuits. Replace any damaged or work pipes before
starting work;
12.2.
PERIODICALLY
Carry out:
An inspection, and tighten wheel attachment nuts / suspension attachment / axle
attachment, after:
- First use;
- The first application of load;
- The first 1000 km;
- Every six months, or 25,000 km;
*
Repeat this procedure after each wheel installation/removal procedure.
-
Tighten wheel attachment nuts in a cross shape.
Tightening torque, see:
8.1 – TECHNICAL SPECIFICATIONS: Tyre dimensions and pressures / Wheel tightening torque
CHECK:
- That wheel hubcaps are tightly fitted to avoid dust / dirt that could damage bearings from getting
in.
- The state of repair of hydraulic / pneumatic pipes;
- The state of repair of hydraulic cylinders / pneumatic vessels;
- The general state of repair of tyres. Cuts, scratches, or poor condition of the rubber that could
affect vehicle safety.
TIGHTENING
ORDER
OF ATTACHMENT
NUTS
(8 BOLTS)
TIGHTENING
ORDER
OF ATTACHMENT
NUTS
(10 BOLTS)
Summary of Contents for HGMB 10000
Page 2: ...0...
