ITALIANO
Русский
ESPAÑOL
PORTUGUES
NE
DERLAN
DS
DEUTSCH
ENGLISH
FRANÇAIS
Hercules HWNP-300
Quick Start Guide – 1/6
INTRODUCTION
A local area
WiFi
network allows users to easily exchange data between computers located in the same room
or in different rooms, share an Internet connection and/or a printer among several computers, play network
games and, above all, does away with the need for kilometers worth of cables.
By following the instructions in this manual, you will be able to install a local area WiFi network and secure it.
MORE DETAILED INFORMATION
Once installation of the drivers for your card is complete, you can access a more detailed manual, in PDF
format, directly on your computer by clicking
Start - All Programs - Hercules Wireless N PCI
. In it, you will
find all of the information you need to learn to configure and use your Hercules Wireless N PCI.
INSTALLING THE PCI CARD
Before installing the WiFi Station N pack, you must first connect your Hercules Wireless N PCI.
Switch off your computer and all devices such as the monitor and printer.
1.
Disconnect the power cable(s).
2.
Remove the cover from your PC’s main unit (for more information,
please refer to your PC’s manual).
3.
Unscrew the metal protector corresponding to the PCI slot you wish to
use and remove it.
Static electricity may damage your equipment. Before removing the card from its protective cover, touch the
metal section at the back of your computer in order to get rid of the static electricity on your body.
- Do not touch the printed circuits on the card.
- Do not let anyone else touch the card.
- Make sure that your clothes don’t touch the components.
4.
Insert your card into its slot by pressing on the card until you are sure
that all points of contact are properly in place.
5.
Screw the card’s metal bracket onto the computer’s frame (screws not
included) and put your PC’s cover back in place.
6.
Screw the 3 connectors on the antenna unit onto the screw threads on
the PCI card.
7.
Unwind the antenna cable and place the 3 antenna unit on a desk,
table or other flat surface so that it stands up in the most vertical
position possible.
8.
Reconnect the power cable(s) and switch on your computer.
As your card is “Plug and Play”, Windows will automatically detect its
presence.
