background image

LIMITED WARRANTY

This Herd Broadcaster was thoroughly tested before it left the factory. We

warrant each Broadcaster sold by us to be free from defects in material and
workmanship when used according to our directions. Our obligation under
this warranty is limited to making good at the factory any defective part or
parts  thereof  which  shall, within  three  months  after  delivery  of  such  Herd
Broadcaster  to  the  original  purchaser, to  be  returned  to  us. No  person  or
company is authorized to make further warranty.

This warranty shall not apply to any Herd Broadcaster which shall have

been repaired or altered outside of our factory in any way so as to affect its
stability or reliability, nor which has been subject to misuse, negligence or
accidents, or was caused by damage while in possession of the consumer
or  resulted  from  failure  to  the  consumer  to  provide  reasonable  and
necessary maintenance.

DAVID E. HERD, President

HERD SEEDER CO., INC. - P.O. BOX 448 - LOGANSPORT, IN 46947

HERD SEEDER COMPANY, INC.

2383 South U.S. 35, P.O. Box 448

Logansport, Indiana 46947-0448

Phone: 574/753-6311

Fax: 574/722-4106

info@herdseeder.com

Litho in U.S.A.   Form GT-77-ATV     (Rev. 7/07)     HSEØØ1Ø-Ø5

MODEL GT-77 PARTS LIST  8/7/07  10:29 AM  Page 8

Summary of Contents for GT-77









Reviews: