TROUBLE SHOOTING
PROBLEMS
SOLUTIONS
There is no sound coming from my Baby RAM.
Make sure the ´MUTE´ button is not pressed.
The audio from my Baby RAM seems less open than the
audio directly from my DAW.
Double check that you have not accidentally pressed the
´MONO´ button.
Even with the volume knob all the way up it doesn´t seem
to output as much as before.
You may have the ´DIM´ button pushed, reducing the
output by -20 dB.
There is no signal present at the Baby RAM´s Output.
Verify that you have correctly connected the Input and
Output cables.
There seems to be lots of extra noise coming from the
unit.
Try pressing the white ´Unbal´ button on the rear panel.
Is it possible to have both outputs or both inputs active at
the same time?
No, you can only use one Input and one Output at any
given time.
7
* For any further doubts or questions please get in contact with us at:
