10
-
HIGH PASS FILTER
: Sets the -3dB filter frequency.
-
OUTPUT
: Attenuates the EQ output signal.
-
EQL
: Activates the EQ section.
-
PHASE
: Turns the signal 180 degrees.
-
SC. EXT
: Takes the AC control signal from the Sidechain In connector.
-
LINK:
Sends the DC control signal to the RCA connector.
-
DYN IN
: Activates the Dynamics section.
-
DYN PRE EQ
: Places the dynamics section ahead of the equalizer.
-
GAIN MAKEUP
: Allows for restoring the gain loss up to 20dB.
-
RATIO
: From a very gentle 1.5:1 to a 10:1 function. On a 5-position
rotary switch.
-
THRESHOLD
: With an extended range from +20dBu (all clockwise) to
-20dBu (all counterclockwise).
-
RELEASE
: On a 5-position rotary switch. From ultra-fast 50
milliseconds to 0.4 seconds and 1automatic release time (fast on
peaks, slow on sustained program).
-
ATTACK FAST: Switches the attack to the fastest setting.
-
SIDECHAIN FILTER
: OFF, 80 and 160 Hz high pass, 800 Hz and 3Khz
bell type boost and 5Khz low pass. These allow for unprecedented
flexible tweaking of your compression. Implemented on a 6-position
rotary switch.
-
BLEND % :
From 100% DRY (compression bypassed all
counterclockwise) to 100% WET (DRY signal bypassed all clockwise)
and everything in between (50-50 at 12 o´clock).
-
BLEND ON
button: Activates the BLEND potentiometer, which means
that if BLEND is OFF, the potentiometer is disengaged and signal is all
WET.
-
VU/GR: Switches the meter activity from tracking gain reduction to
output level.
-
METER
: Measures gain reduction in dB or Output level.
-
POWER
: Turns on the unit.
