TROUBLE SHOOTING
PROBLEMS
SOLUTIONS
Applying Cut and Boost to the frequencies doesn´t have
any affect on the signal.
Make sure the MOTORCITY EQualizer isn´t in OUT
mode.
There is a very distorted signal being outputted from the
unit.
Check to see if you have left the OUTPUT GAIN knob in
too high of a position.
There is almost no output signal at all.
Check to see if you have left the OUTPUT GAIN knob in
too low of a position.
When I activate the equalizer there is just too much of an
increase in the signals volume.
Adjust the OUTPUT GAIN knob to a lower position to
compensate for any big equalizer adjustments of
frequencies.
When I activate the equalizer there is just too much of a
drop in the signals volume.
Adjust the OUTPUT GAIN knob to a higher position to
compensate for any adjustments made to frequencies.
The MOTORCITY EQualizer just makes every track sound
too good.
Be thankful you finally have the ´Holy Grail´ of EQs at your
fingertips.
17
* For any further doubts or questions please get in contact with us at:
