TROUBLE SHOOTING
PROBLEMS
SOLUTIONS
There is almost no sound coming from the SUCCESSOR. Make sure you have raised the
GAIN MAKE-UP
to a
sufficient level to recover from any gain reduction taking
place.
There doesn
́
t seem to be any compression occuring.
Make sure you have adjusted the
THRESHOLD
level to a
reasonable setting as well as selecting an appropriate
RATIO
for the signal.
I
́
m getting way too much compression for what I need and
it´s too aggressive.
Try adjusting the
THRESHOLD
and/or
RATIO
to alter the
amount and/or intensity of the compression.
I
́
m still getting way too much compression for what I
need.
Try adjusting the
SC FILTER
to make the SUCCESSOR
less sensitive to the lower frequencies.
The compression I am getting is still altogether too
aggressive for what I am looking for.
Try different settings on the
ATTACK
and
RELEASE
controls to soften the effect.
The readings on the VU meter don
́
t seem to correspond
with what is actually happening.
Sounds like it
́
s time for some calibrating.
The is no compression happening.
Make sure you have pressed the ´
DYNAMICS IN
´ button.
I need to do some very special frequency dependent
compression.
Push the ´
EXT SIDECHAIN
´ button and make sure you
have connected a (e.g., graphic equalizer) and adjusted it
accordingly.
There seems to be no compression happening in spite of
the drastic settings I´ve chosen.
Check to see if you have left the
BLEND
control all the
way CCW, in the
DRY
position.
I´m having trouble determining the correct
RELEASE
time
for the material I’m processing.
Try the automatic release times
A1
and/or
A2
.
10
* For any further doubts or questions please get in contact with us at:
