MCM-8 Iss1
Preliminary User Guide v1.1
3
Right part of the unit is dedicated to the mixer’s center section, as follows:
-
VU Meters: Measuring the average level at the master outputs.
-
Master Fader: Attenuates the Mix’s output from unity to minus infinity. The control
has a stepped feel for easy recall of settings. Fader all clockwise means unity gain,
whilst 12 o’clock means an approximate 20dB of attenuation.
At the bottom right there are LEDs showing the correct status of the external power source.
BACK PANEL OVERVIEW
Upper row on the back panel corresponds to the individual XLR and combined DSUB channel
outputs.
Lower row corresponds to the individual XLR and combined DSUB channel inputs.
Both DSUB connectors are wired following the TASCAM protocol.
Stereo Mix output is located far left, on a pair of male XLR connectors.
Aux Inputs are located above the 8 inputs , on a pair of female XLR connectors. They´re
hardwired Left and Right and are unity gain.
External Power Supply connector is located on the bottom left corner.