If the box is delivered with a rear panel, insert the panel in the grooves at the back of the side panels.
Then, from the top to the bottom, push the rear crossbars with the dimensions 19 x 27 mm onto the
metal bolts on the side walls. 5 bars in total. In doing so, the holes in the rear crossbars must always
be facing forward.
The 4 bars from the top each have a distance piece screwed on, see the photograph!
Hang the base panels in the holes
provided for this.
Press the beech wood perch bars onto
the metal bolts on the upright side
walls. 4 pieces per section.
In doing so the notch on the bars
must always point to the back.
1
2
3
ASSEMBLY INSTRUCTIONS FOR 3-SECTION WIDOWHOOD BOXES 94.2 CM
Homing Pigeon Breeding Boxes
