Hermes 313 Assembly Instructions Manual Download

Page: 5 / 6

The top panel is fitted from above onto

the hooks of the upright side panels.

Insert the floors.

Fit the dividing piece. The dowel with the metal spring is inserted into the hole of the cross bar and

pressed up. Now carefully move the dividing piece to the side until it snaps into the two holes of

the perch bar.

ASSEMBLY INSTRUCTIONS FOR 3-SECTION WIDOWHOOD BOXES 94.2 CM

Homing Pigeon Breeding Boxes

Summary of Contents for 313

Page 2: ... plastic hooks for the top panel cover must be screwed only into the middle panels Arrange the front doors and front bars in the sections For each section there is a right hand middle and left hand door 4 5 6 ASSEMBLY INSTRUCTIONS FOR 3 SECTION WIDOWHOOD BOXES 94 2 CM Homing Pigeon Breeding Boxes ...

Page 3: ...rs to the front bars Fit the front bars with the attached front doors into each section Push the two outer front doors forward 7 8 9 ASSEMBLY INSTRUCTIONS FOR 3 SECTION WIDOWHOOD BOXES 94 2 CM Homing Pigeon Breeding Boxes ...

Page 5: ... dividing piece The dowel with the metal spring is inserted into the hole of the cross bar and pressed up Now carefully move the dividing piece to the side until it snaps into the two holes of the perch bar 13 14 15 ASSEMBLY INSTRUCTIONS FOR 3 SECTION WIDOWHOOD BOXES 94 2 CM Homing Pigeon Breeding Boxes ...

Page 6: ...ces The sectioned box is fully assembled This must now be aligned using a spirit level and then be firmly screwed to the back wall 16 17 18 ASSEMBLY INSTRUCTIONS FOR 3 SECTION WIDOWHOOD BOXES 94 2 CM Homing Pigeon Breeding Boxes ...