12
My first steps with miniVAP
®
1. Flavor and aroma have a lesser point of vaporization than other therapeutic components.
The basket or liquid filter can be placed directly inside the vaporization chamber or it can be
connected to the flexicone or fl first.
Adjust the
temperature
of
miniVAP
®
based on the results you’d like to obtain. If it’s the first
time you’re using miniVAP, we recommend that you start from low to high (from blue to red).
This way you can get a better idea of the different results you can achieve with the miniVAP
®
.
The best
extraction
takes place after 3-4 seconds of deep inhalation.
miniVAP
®
functions
almost 100% by convection heating, so there must be sufficient warm air circulating in the
vaporization chamber to create vapor:
• The first and second inhalations normally don’t produce visible vapor. although they do
carry strong, pure flavor. The first current of warm air will bring the most volatile
1
chemical
components. After 2-3 inhalations you should begin to see vapor.
• Stable temperature is important along with using slow, deep inhalations. If the inhalation is
strong for more than ten seconds, the accumulation of vapor will be more dense and satisfying.
WARNING. miniVAP
®
is not responsible for the possible effects of inhaling vapor
produced by putting a substance into the vaporizer.
