Herni
I. General information
• Page 5 •
1.10 Using the 3-point-harness (Gr. III)
To be able to absorb the enormous forces during an accident, the IPAI-NXT must
be secured with the vehicle's three-point belt according to ECE 44, R14 and R16.
An ISOFIX connection alone is not enough.
1. Put your child in the child seat - ideally by
turning the seat by 90 ° (option: swivel adapter).
2. Pull out the vehicle belt and guide it (in front of
your child) to the seat belt buckle (19).
DANGER!
Make sure that the vehicle belt is not
twisted, otherwise the full protective effect of the
restraint system is not given anymore.
3. Lock the latch in the car buckle (19) with a CLICK.
4. Place the Diagonal Belt (18) and Lap Belt (17)
on the side of the Car Seat Belt Buckle (19) in the
light red belt guide (01) of the Seat Cushion.
DANGER!
The Car Seat Belt Buckle (19) must not
be between the light red belt guide (01) and the
arm rest.
5. Place the lap belt (17) on the other side of the
seat cushion in the light red belt guide (01).
DANGER!
The lap belt (17) must run as low as
possible on both sides over the hips of your child.
