27
5. Horn switch ( )
Press the horn switch (5) to operate the horn.
Right handlebar controls
1. Electric starter switch ( )
Ensure starter switch (1) is operated when the
vehicle is in neutral gear. If the vehicle is
engaged in gear, press the clutch lever before
operating the starter switch. Release starter
switch after the engine has started.
•
If electric starter switch is pressed
continuously and engine does not start,
cranking of engine will stop after 5 secs.
After that rider again needs to press the
electric starter switch.
•
If engine started, cranking of the engine will
stop after r/min reaches more than 800
r/min under normal condition.
CAUTION
!
!
(1) Electric starter switch (2) i3s switch
(1) i3s switch
2. i3s switch
There is an i3s switch
provided to enable
(2)
the rider for turning i3s mode “ON” or “OFF”
based on the traffic conditions.
i3s (IDLE STOP START SYSTEM)
Starting & Warm up the engine:
Keep the i3s switch (1) to “OFF” position.
Turn the ignition key to “ON” ( ) position.
1
The i3s indicator (2) will glow on the
speedometer console for 2 seconds and turn
“OFF”. For the activation of i3s system, start
the engine and let it idle till the engine gets
warmed up or temperature reaches more than
°
75 C.
2
1
