34
11
9
10
The Air Cleaner Element should be
cleaned by blowing moisture free
pressurized air.
Start cleaning by directing the air nozzle
(11) inside the element and cleaning it by
rotating the element about its axis.
Install the air cleaner element on holder,
insert the air cleaner assembly into the
inlet air duct & press gently to fix the
mounting clamp in housing. Ensure
cover lug should take proper seat on the
other side of the mounting clamp.
5. Replace it earlier if it becomes very dirty,
damaged on surface or on the sealing area.
(9) Air cleaner element (10) Element holder
(11) Air nozzle
Now blow the dust from the surface of the
paper element about 50 mm away from it,
O
with the air nozzle (11) at an angle of 45
and moving it along the paper pleats.
Never wash the air cleaner element. Only
blow air for cleaning the dust, as
explained. Replace air cleaner element
every 12000 kms.
Never blow air initially from outside to
inside as the fine dust particles may go
deep inside the element.
O
45
50 mm
Summary of Contents for HF-Deluxe ECO
Page 19: ...16 8 motorcycle 3 2 NOTE RES Position ON Position...
Page 59: ...56 ROAD SIGNS...
Page 60: ...57...
