40
Adjustment
Park the motorcycle on its main
stand with the transmission in neutral
and the ignition switch in “OFF”
position.
Loosen the rear axle nut (1) and sleeve
nut (2).
Loosen the drive chain lock nut (3).
Turn both the adjusting nuts (4) in an
equal number of turns until the correct
If the drive chain slack is excessive
when the rear axle is moved to the
farthest limit of adjustment, the drive
chain is worn and must be replaced.
drive chain slack is obtained. Turn the
adjusting nut clockwise to decrease the
slack or anticlockwise to increase the
slack of the chain.
Tighten the rear axle nut and sleeve nut.
Align the chain adjuster index mark (5)
w i t h t h e c o r r e s p o n d i n g s c a l e
graduations (6) on both the sides of the
swing arm equally.
Check the drive chain slack again.
- Rear axle nut torque: 5.4 kgf-m.
- Sleeve nut torque: 4.4 kgf-m.
(1) Rear axle nut
1
Summary of Contents for HF-Deluxe ECO
Page 19: ...16 8 motorcycle 3 2 NOTE RES Position ON Position...
Page 59: ...56 ROAD SIGNS...
Page 60: ...57...
