(i) Decrease free play (ii) Increase free play
(6) S econd adjuster nut (7)Joint
(8) Adjuster nut (9) Brake arm
is created between joint (7) and the slot on
the first side in integrated brake arm.
Ÿ
After ensuring the gap, turn the second
adjuster nut counterclockwise by half
rotation.
Ÿ
Turn the second adjuster nut (6) until a gap
(i)
(ii)
B
6
7
7
A
B
(A)
Decrease free play (
CW
)
(B) Increase free play (ACW)
9
8
Make sure the cut-out on the adjusting nut
(1) is seated on the brake joint pin (2) after
making final free play adjustment.If proper
adjustment cannot be obtained by this
method, visit your Authorised
Hero
MotoCorp
workshop.
(1) Adjusting nut (2) Brake joint pin
ü
X
(A) Cut-out not seated
(
B
) Cut-out seated
1
2
2
1
Ÿ
If the free play is more than 30 mm further
turn the adjuster nut to obtain desired free
play.
40
F
C
FREE PLAY: 20-30 mm
Ÿ
Check the free play of integrated/Rear
brake pedal.
Ÿ
Make free play adjustment by turning the
adjuster nut (8) in the brake arm (9).
Rear brake
NOTE
“F” & “C” is marked on integrated brake arm.
Summary of Contents for HF-Deluxe
Page 54: ...51 1 Canister 1...