B
A
1
(1) Pin spanner
Rear shock absorber adjustment can be made
according to the load/road conditions.
î
Check the rear shock absorber by pushing
hard downwards on rear grip while the
motorcycle is not parked on stand. The
suspension action should be smooth and
their should be no oil leakage.
Rear shock absorber adjustment
î
In direction A Stiffer
î
In direction B Softer
FRONT WHEEL REMOVAL
î
Raise the front wheel off the ground.
(Spoke/Cast wheel version)
î
Remove the speedometer cable (1) by
pressing the tab (2) & pulling cable out.
44
1
(1) Headlamp adjusting bolt
SUSPENSION
Inspection
î
Check the front forks by locking the front brake
and pumping the front fork up and down
vigorously. The suspension action should be
smooth and their should be no oil leakage.
Front
Rear
WARNING
!
!
An improperly adjust headlamp may blind
oncoming rider/driver or it may fail to light
the road for a safe distance.
NOTE
Always adjust both the rear shock absorber to
the same position. Use the pin spanner (1)
available in the tool kit.
