#HeroCamper™ –
Lammefjordsvej 5
–
6715 Esbjerg N
–
Denmark
Phone +45 7022 5840
–
sales@herocamper.com
www.herocamper.com
VAT No DK -40193189
Page
20
of
92
COOL mode
Press the “MODE” key, select the “ ” mode, and Press the dow
n arrow key to set
the temperature lower than the room temperature. Press the “
FAN
” key to select
different speed and the plenum will display “ ” and the set temperature.
DRY mode
Press the “MODE” key, select the
DRY
mode, the air volume is un- adjustable to stay
at minimum level, and the plenum will display “ ” and the set temperature. Make
sure to adjust the setting temperature at least 1
℃
lower than room temperature to
make the dry mode working.
FAN mode
Press the “MODE” key, select the
FAN
mode, Press the “FAN” key. Select
Low/Medium/High/AUTO. The plenum will display “
” and the indoor environment
temperature.
HEAT mode
Press the “MODE” key, select the
HEAT
mode, Press the up arrow key to set the
temperature higher than the room temperature. Press the
FAN
key to select
different speed. And the plenum will display “ ” and the set temperature.
Celsius and Fahrenheit degree change
In any mode, press the “
℃
/
℉
” key, you can vary temperature between Celsius and
Fahrenheit.
LED turn on and turn off
Press the LED key, the LED light turn on, Press the LED key again, the LED light turn
off.
