11
#HeroCamper™ – Lammefjordsvej 5 – 6715 Esbjerg N – Denmark
Phone +45 7022 5840
– sales@herocamper.com
www.herocamper.com
VAT No DK -40193189
There are waterdrops around the refrigerator casing or door gap
•
It is a normal phenomenon; the moisture will condense to water when it touches a cold surface of
the refrigerator.
The compressor is slightly noisy when starting
•
It is a normal phenomenon; the noise will be reduced after the compressor works stably.
Code F1 displayed
• Possible cause: low voltage to fridge. Adjust the battery protection from High to Medium or from
Medium to Low.
Code F2 displayed
• Possible cause:
condenser fan is overloaded. Disconnect power to fridge for 5 minutes & re-start.
If the code shows again, contact manufacturer for service.
Code F3 displayed
• Possible cause: the compressor starts too frequently. Disconnect power to fridge for 5 minutes
&
re-start. If the code shows again, contact manufacturer for service.
Code F4 displayed
• Possible cause: compressor not kicking in. Disconnect power to fridge for 5 minutes & re
-start. If
the code shows again, contact manufacturer for service.
Code F5 displayed
• Possible cause: overheating of the compressor & electronics. Disconnect power to fridge for 5
minutes & re-start. If the code shows again, contact manufacturer for service.
