di Series User/Software Manual
23
www.heroninstruments.com
905-628-4999
Data Reports - Continued
Refresh:
Re-downloads data incorporating any newly recorded data points since last download.
Save on Computer:
Clicking save on computer allows you to export the data represented in the table
on the dipperLog Software. You can export as either a Comma Separated File (.csv), or as a Text File
(.txt).
Save Graph:
Clicking save graph allows you to export the data represented in the line graph on the
dipperLog Software. You can export as either a PNG (.png) or JPEG (.jpeg) image.
Data Reports - Advanced Features
PLEASE NOTE: When using these features in the “Data Reports” tab, the adjustments can be made
at any time, before downloading the data or while viewing the data after download. When using these
features in the “Multiple Download” tab, the adjustments must all be selected prior to download.
This feature is used to offset the recorded data by one of the following values:
First Reading:
In cases where no barLog data is available but your dipperLog was started before placement in well,
this option allows you to use that first recorded barometric pressure reading to compensate all
subsequent data points. This will not adjust your data for barometric influences over the time of the
recordings, it will simply remove a constant value representing an approximate barometric pressure.
Last Reading:
This option works the same way as the “First Reading” choice with the exception of using the last
recorded data point for the calculations. If your dipperLog recorded the first data point when
submerged because of a delayed start, this allows you to use the last reading as an alternate
barometric pressure value.
Programmed Value:
This selection will use the saved “barometric” value that the dipperLog stores when initially started.
This is the same value that is used to calculate the Real Time reading value. This stored value will
change every time the dipperLog is reprogrammed and re-started.
Custom Value:
When this option is selected a new field becomes available which enables the user to enter a
constant value by which to offset the recorded values in memory. This could be an average
barometric pressure reading from a local weather station or news channel.
