3
EN
Directory
1.
Technical Data
24
1.1
Range of models
24
1.2
Certification
24
1.3
Operating range
24
1.4
Serial scope of delivery
24
1.5
Fuel
24
1.6
Components
24
1.7
Electrical data
24
1.8
Acoustic emissions
24
1.9
Packing
24
2.
Functional description
24
2.1
Mixing device
25
2.2
Combustion air blower
25
2.3
Fuel pump and nozzle closing system
25
2.4
Flame monitoring
25
2.5
Ignition device
26
2.6
Oil firing unit
26
3.
Initial operation
27
3.1
Assembly of the burner
27
3.2
Electricity supply
28
3.3
Combustion chamber – minimum dimensions
28
3.4
Exhaust gas system
28
3.5
Oil supply system, oil pipe dimensions
28
3.6
Oil connection on the burner
29
3.7
General inspections
29
3.8
Burner adjustment
29
4.
Maintenance of the burner
30
5.
Basic adjustment table
31
6.
Wiring diagram
32
7.
Expanded view with spare parts list
33
Spare parts list
34 - 35
8.
Malfunction diagnosis
36
9.
Dimensions of the burner
37 - 39
10. Accessories
40
10.1 Adjustment gauge
40
10.2 Knurled screw to dismount the diaphragm valve
40
10.3 Portable pump tester
40
10.4 Post ventilation system
40
10.5 Suction silencer
40
10.6 Sliding flange with additional O-Ring seal
41
10.7 Oil flow meter and operating hour meter
41
10.8 Screw plug for the return flow connection of the plug
41
10.9 Service case
41
11. Customer service
41
Oil burner service record sheet
78 - 79
Herrmann blue flame burner HL 60
Efficient, clean and quiet
Rising energy prices act as an incentive to save energy. At the
same time there is a growing willingness of the consumer to make
a personal contribution to environmental protection. This change of
awareness also reflects in our products. Therefore our modern bur-
ner system enables extremely low pollution combustion with the
smallest air surplus. Not only the quality of the air, but also the effi-
ciency of the heating installation and its cost effectiveness will
benefit from this.
Proof of our efforts in relation to energy efficiency and the minimi-
sing of pollutants is the excellent performance of our HL 60 blue
flame burner G/I/K/N/P in the type test, in accordance with (Euro-
pean Standard) EN 267:2011-11, classification 3, the German Envi-
ronmental Label “Blue Angel”, in accordance with RAL-UZ 9, and
the Swiss Ordinance on Air Pollution (LRV).
The extremely pressure stiff blower designed specifically for the
combustion of fuel oil guarantees a pulsation-free start of the
burner. Thanks to another high-quality components, a reliable
operation of the burner a long lifetime is ensured. The almost her-
metically sealed burner housing prevents that odours from the
burner inside the site appears. The innovative design of air intake
are different inlet for combustion air available. In addition, offered
also specially adapted intake air silencer for the room air-depen-
dent as well as the room air independent operation. In combina-
tion with the sound-absorbing lined cover the operating noises of
HL60 reach a previously unmatched low level. The excellent
access to all components, and the practical service position to
replace the nozzle with oriented upward nozzle set in terms of
maintainability new standards. Similarly, the removal and replace-
ment of all components is designed for simplicity and practicality.
So by the pluggability of all electrical connections and the use of
a single Allen wrench for almost all screw allows for easy replace-
ment of any component is possible.
Heating with oil has a tradition as well as a future with a Herr-
mann burner.
Oil as a fuel will play a decisive role for future heating moderni -
zation. In particular, new heating oil qualities such as EL, low
sulphur, or the growing admixture of liquid biocomponents, provide
a high potential for the future. Our HL 60 blue burner G/I/K/N/P is
well prepared for this because no modernization of burner com -
ponents is required up to an admixture of 10% (DIN 51603-6 EL-A
Bio 10).
At the final inspection each burner will be tested under operational
conditions. The period of guarantee amounts to two years from the
date of purchase (date of invoice). Please note that a specialized
company must carry out the installation, initial operation and main-
tenance. The present installation and maintenance instructions
contain significant information in this respect. In order to ensure
continuous saving and low pollutant operation of the system we
recommend an annual inspection of the burner by a specialized
company.
With best regards
Herrmann GmbH u. Co. KG
