manualshive.com logo in svg

Hertz H8 DSP, User Manual

The Hertz H8 DSP is an advanced digital sound processor that elevates your car audio experience. Unlock the full potential of your sound system with this user-friendly device. Enhance your audio settings, fine-tune your sound output, and achieve the perfect balance. Download the comprehensive user manual for free at 88.208.23.73:8080 and discover the limitless possibilities that the Hertz H8 DSP has to offer.

Share
Download
background image

H8 DSP

Digital Interface Processor

User’s manual

2

Index

 

1.  PRODUCT DESCRIPTION / SAFETY PRECAUTIONS

  ...................................................................................................... 03

2.  PACKAGING CONTENTS

  ................................................................................................................................................... 03

3.  H8 DSP and DRC INSTALLATION

 ..................................................................................................................................... 04

4.  CONNECTION PANELS – DESCRIPTION 

 ......................................................................................................................... 05 

 

  4.1 Multipolar connector ................................................................................................................................................ 05 

 

  4.2 Input signals  ............................................................................................................................................................. 06 

 

  4.3 Output signals  .......................................................................................................................................................... 06 

 

  4.4 Inputs - remote control outputs and power supply.............................................................................................. 07 

 

  4.5 Controls and settings  .............................................................................................................................................. 09

5. CONNECTIONS

  .................................................................................................................................................................. 10 

 

  5.1 Power supply and remote turn on  ......................................................................................................................... 10 

 

  5.2 How to turn the h8 dsp on / off  ............................................................................................................................. 10 

 

  5.3 Personal computer and digital remote control (drc)  ............................................................................................ 11 

 

  5.4 High-level input signals ........................................................................................................................................... 11 

 

  5.5 Low-level input signals  ........................................................................................................................................... 12 

 

  5.6 Optical in digital input ............................................................................................................................................... 12 

 

  5.7 Output signals  .......................................................................................................................................................... 13

6.  HOW TO SETUP THE H8 DSP WITHOUT A PC

  .....................................................................................................................14 

 

  6.1 How to calibrate the master front-rear input sensitivity  .................................................................................... 14 

 

  6.2 Source de-equalization ............................................................................................................................................ 15

 

  6.3 Amplifiers sensitivity calibration  ............................................................................................................................ 17

 

  6.4 How to calibrate the aux in input sensitivities  ..................................................................................................... 17

7.  H8 DSP SOFTWARE AND DRIVERS INSTALLATION / UNINSTALLATION GUIDE

  ....................................................... 18 

 

  7.1 PC software installation guide  ............................................................................................................................... 18 

 

  7.2 Drivers installation guide  ........................................................................................................................................ 20 

 

  7.3 H8 dsp software uninstall  ....................................................................................................................................... 21 

8.  H8 DSP INSTALLATION GUIDE USING A PC

  ................................................................................................................... 22 

 

  8.1 Selecting the master (front / rear) inputs and outputs - target mode  .............................................................. 22 

 

  8.2 Offline mode  ............................................................................................................................................................. 29 

 

  8.3 Adjusting acoustic reproduction  ............................................................................................................................ 30 

 

  8.4 Device info  ................................................................................................................................................................. 30 

 

  8.5 “File” main menu  ...................................................................................................................................................... 30 

 

  8.6 “Config” main menu  ................................................................................................................................................. 32 

 

  8.7 Selected input  ........................................................................................................................................................... 33 

 

  8.8 Channel map  ............................................................................................................................................................. 33 

 

  8.9 Select channel  .......................................................................................................................................................... 33 

 

  8.10 Filter settings  ......................................................................................................................................................... 34 

 

  8.11 Set distance and delay  .......................................................................................................................................... 36 

 

  8.12 Graphic equalizer  ................................................................................................................................................... 38 

 

  8.13 Output level  ............................................................................................................................................................ 39 

 

  8.14 Memory  ................................................................................................................................................................... 40

9.  TROUBLESHOOTING

  ......................................................................................................................................................... 41 

 

  9.1 Synchronization with a pc  ....................................................................................................................................... 41 

 

  9.2 Background noise ..................................................................................................................................................... 41 

 

  9.3 Firmware upgrade  .................................................................................................................................................... 42 

 

  9.4 Rescue mode  ............................................................................................................................................................ 43 

10.  TECHNICAL SPECIFICATIONS

  .......................................................................................................................................... 44

Summary of Contents for H8 DSP














































Reviews:

No comments

Related manuals for H8 DSP

Bamix SliceSy Instruction Manual preview
SliceSy
Brand: Bamix Pages: 48
Taurus PICAR 400 Manual preview
PICAR 400
Brand: Taurus Pages: 10
Panduit ATLONA AT-OME-CS31-SA-HDBT Installation Manual preview
ATLONA AT-OME-CS31-SA-HDBT
Brand: Panduit Pages: 7
Euro-Pro EP91W Owner'S Manual preview
EP91W
Brand: Euro-Pro Pages: 6
EVS Xeebra Installation And Configuration Manual preview
Xeebra
Brand: EVS Pages: 64
Boss Food Processor Instruction Manual preview
Food Processor
Brand: Boss Pages: 10
Vitek VT-1446 Manual Instruction preview
VT-1446
Brand: Vitek Pages: 40
Vitek VT-1617 Manual Instruction preview
VT-1617
Brand: Vitek Pages: 32
Trebs Comfortcook 99394 Manual preview
Comfortcook 99394
Brand: Trebs Pages: 38
Gaoke GK-9000 V-II User Manual preview
GK-9000 V-II
Brand: Gaoke Pages: 12
National Instruments NI 9212 Getting Started Manual preview
NI 9212
Brand: National Instruments Pages: 20
Kasanova SKN000001NOC Instruction Manual preview
SKN000001NOC
Brand: Kasanova Pages: 32
Black & Decker FP2500 Use And Care Book Manual preview
FP2500
Brand: Black & Decker Pages: 29
Black & Decker SL1050 Use & Care Manual preview
SL1050
Brand: Black & Decker Pages: 12
Campomatic FP700 grand chef Instruction Manual preview
FP700 grand chef
Brand: Campomatic Pages: 12
Orban OPTIMOD-AM 9300 Operating Manual preview
OPTIMOD-AM 9300
Brand: Orban Pages: 242
Continental Electric CE22391 User Manual preview
CE22391
Brand: Continental Electric Pages: 8
Tekvox 79060-WPS User Manual preview
79060-WPS
Brand: Tekvox Pages: 103

Brands by name

Popular brands

Load more brands