© HES 2001
2
Jamb
Face
Jamb
Reveal
8-1/4
[209.55]
9-1/8
[231.78]
Note:
Horizontal Lock
Down Screws x2
8-1/4
[209.55]
Note:
Horizontal Lock
Down Screws x2
Installation Instructions
FIG 1
FIG 2
ALUMINUM JAMB INSTALLATION
METAL JAMB INSTALLATION
1. Prepare door jamb per appropriate template detail.
2. Unplug wire pigtail from electric strike.
3. Connect wires coming from the low voltage power
s ource (see wiring diagrams and electrical
s pecifications on page 4) to the electric strike pigtail.
4. Re-connect the pigtail to the electric strike.
5. Install electric strike to jamb, using 1/4 x 20 cap screws.
F urther adjustments are possible by loosening 1/4 x 20
s crews and sliding the strike using its slotted holes.
Note: For 12/24 AC/DC applications, see page 4.
