© HES 2001
3
Field Reversable
(Fail Secure to Fail Safe)
1. Remove the back cover plate.
2. Remove the two screws that are closest to the mounting hole in the strike.
3. Rotate the selector stop 180 (The L-shape should face the opposite direction).
4. Reinstall the two screws.
5. Remove the screw, holding the solenoid that is the closest to the keeper.
6. Loosen the second screw from the solenoid.
7. Move the solenoid and any shim located under the solenoid bracket to the second
screw hole location. For Fail Safe operation the solenoid should be positioned at a
slight angle.
8. Reinstall and tighten both screws and reinstall back plate.
Note: Intended for Fire Rated applications (fail secure only)
o
Note: Intended for Fire Rated applications (fail secure only).
