Part Number 3085006.001, Rev. A
10
CAUTION
The Installer must ensure that the lock can be opened before closing the cabinet door.
14.
INSTALL the single door strike plate.
PLACE the strike plate over the pilot holes, and INSERT and TIGHTEN the two screws in the slotted holes.
CLOSE the door to verify installation, and ADJUST the strike plate if necessary.
INSERT and TIGHTEN the lock down screw on the strike plate.
15.
INSTALL for the double-door strike plate mounting bracket. (OPTIONAL)
NOTE:
The double-door strike plate bracket requires that one door can be secured.
a.
PLACE the bracket on door, making sure it aligns with the mark made in Step 2c and the edge of the door.
b.
MARK the door.
c.
REMOVE the bracket and DRILL pilot holes at the two marks.
d.
INSTALL the bracket using the provided mounting screws.
16.
INSTALL the double-door strike plate.
a.
PLACE the strike plate over the holes on the bracket.
b.
INSERT and TIGHTEN the three 6-32 x 5/16” (3.5 mm x 7.94 mm) provided screws.
