-
85
-
7
Sensor Maintenance
■ Storage
Store the product in a dry, well ventilated place. The ambient temperature shall be between -40°C and +85°C, and the humidity below 85%.
Please check Section 1.4 (Specifications) for product IP rating, and avoid any ingress beyond that rating.
■ Transport
Package the product in shock-proof materials to avoid damage during transport.
■ Cleaning
Stains on the product's cover lens, such as dirt, fingerprints, and oil, can negatively affect point cloud data quality.
Please perform the following steps to remove the stains.
NOTE
· To avoid damaging the optical coating, DO NOT apply pressure when wiping the cover lens
· Only clean the stained area of the cover lens
· Check before using a lint-free wipe. If the wipe is stained, use another
1) Thoroughly wash your hands or wear a pair of powder-free PVC gloves
2) To remove dust, blow dry air onto the cover lens, or use a piece of lint-free wipe to lightly brush across the dusty area
To remove persistent stains, move on to the next step
(Continued on the next page)
Summary of Contents for Pandar128E3X
