Hesperide EQUADOR 165058, Manual

CARE INSTRUCTIONS

1/ Your product

Properties

Part of the frame is made up of aluminium parts (for its lightness) and epoxy painted 
steel parts (for its sturdiness).
Aluminium is a light, resistant material that doesn't rust.
Epoxy steel is a steel covered with a protective paint against rust.
Polyester is a synthetic fabric that offers good resistance to tearing and rubbing.

Manufacturing and assembly

The manufacturing then assembly of this product requires leaving clearance between 
the different parts.
It is therefore normal to observe gaps/slack that may reach several millimetres between 
the different assembled elements (between two slats, between boards...).
This tolerance necessary for the correct realisation of your product can be behind little 
geometric differences.
This does not lead to any loss of function of your product.

Irregular appearance

Each product is manufactured and assembled industrially from parts whose surface 
treatment is carried out individually, before assembly. These metallic elements cannot be 
free from appearance irregularities coming both from the surface treatment process and 
assembly operations. The final appearance of the product is therefore directly linked to 
these possible irregularities.

Regularity of seams

Although we pay special attention to the quality and regularity of seams, it is possible to 
notice that some threads are not cut after the break point of the seam. There is no risk of 
the seam becoming undone. Cut this thread with a simple pair of scissors.

Size of the cloth

The size indicated always corresponds to the size flat of the cloth. The useful size is slightly 
less, due to the angle given to the cloth by the parasol.

2/ Precautions for use

We cannot guarantee the good behavior of this product under difficult atmospheric conditions.
We recommend closing the umbrella during strong winds, thunderstorms, hailstorms or heavy 
rain. In these conditions, it is recommended not to be under or near the parasol.
After each significant bad weather we invite you to check the general condition and the solidity 
of the structure before use. Attention, danger of overturning in the event of a gust of wind.
Fold the parasol in case of wind and strap it.
It is recommended not to leave an open umbrella unattended.
The accumulation of water and / or dead leaves on the canvas contributes to its degradation 
and to that of the structure: make sure to clean it regularly and to eliminate any pockets 
of water.
Do not hang products on the frame.
It is necessary to fix the parasol in a stable, weighted base and on a flat surface.
We do not recommend mounting a light fixture or other heat source on the structure in 
contact with or near the fabric.
Watch out for knives and other sharp objects being handled nearby. Also watch out for 
cigarette burns and other sources of heat.