EN
©2021 Hestan Commercial Corporation
20
CL
CL
3
1
4
" [82.6]
11
64
" [4.3] FOR
LIGHT PIPE
2
1
4
" [57.2]
2
39
64
" [66.3]
3
32
" [2.5] TYP.
X [11] DEEP
8 PLACES
10
13
32
"
[264.3]
29
27
32
"
[758]
3
1
4
"
1
9
32
" [32.6]
1
61
64
BACK VIEW
NOTE: DIMENSIONS IN [ ] ARE IN mm.
[82.6]
" [49.6]
7
16
"
PILOT HOLES
7/16” [11 mm]
dia. 3/32”
[2.5 mm]
7"
7"
3
4
"
[177.8]
[177.8]
[19.1]
INSTALLATION
- CUSTOM DRAWER FRONT (-OV MODELS)
CUSTOM PANEL REQUIREMENTS:
CUSTOM PANEL REQUIREMENTS:
• Have a typical thickness of 3/4” [19 mm].
• Have all edges finished.
• If using wood, the back must be sealed to prevent moisture damage.
• Be capable of withstanding temperatures above 158°F [70°C].
PREPARING CUSTOM DRAWER FRONT
PREPARING CUSTOM DRAWER FRONT
1. Mark pilot holes on the back side of the panel according to the dimensions indicated in the
drawing below.
2. Drill pilot holes with a 3/32” [2.5 mm] drill bit. Be careful not to drill all the way through the
panel. Pilot holes should only be 7/16” [11 mm] deep.
