8
the stone, the entire surface should be gently
sanded at the end.
Chipped surfaces
This section covers more serious damage, such
as if a piece has chipped off or is missing. If the
chipped off piece is intact, it can be glued in
place using ’waterglass’ (available from Heta
A/S). Apply waterglass to the surfaces, clamp in
place for 24 hours, then sand using sandpaper
(120 grit). If a piece is missing or an impact mark
is deep, you can repair the damage using a mix
of soapstone powder and waterglass (available
from Heta A/S). Mix the powder and waterglass
to an appropriate consistency. Clean off any
dust before applying the mixture. Brush the sur-
face with waterglass to ensure good adhesion.
Apply the soapstone mixture generously, as it
contracts during hardening. Do a repeat appli-
cation if necessary. The hardened surface can
be sanded after 24 hours. Use 60-80 grit sand-
paper initially, and then 120 grit sandpaper to
finish.
Cleaning ceramic surfaces
The ceramics have a glazed surface and can be
wiped with a damp cloth.
Maintenance
Cleaning the glass
Incorrect firing, for example using wet wood,
can result in the viewing window becoming co-
vered in soot. This soot can be easily and effec-
tively removed by using proprietary stove glass
cleaner.
Cleaning and repairing
soapstone surfaces
Soapstone is a relatively soft natural product. It
is therefore possible to repair scratches or other
damage to the surface.
Cleaning soapstone surfaces
Clean soot, grease, etc. from surfaces using
water and soft soap or similar.
- Spread the soap on the surface
- Let it stand a few minutes
- Rinse off the surface using hot water
- Once the surface is dry you can sand it gently
if necessary using sandpaper (120 grit)
Minor scratches and impact marks
Gently sand using sandpaper (120 grit) until the
scratches are gone. It is a good idea to use a
sanding block. To maintain a uniform surface on
Guarantee
Heta wood stoves, are subjected to a strict quality control during production and before delivery to
the dealer. Therefore, the duration of the warranty is
5 years
on this product, covering manufactu-
rer’s defects,
1 year
on paint adhesion defects from purchase date from Heta and a 3 months total
warranty for seals, vermiculite and glass from the date of sale from the dealer.
Claims concerning stoves older than
3 months
, will be assessed by our quality team on a one-by-
one basis. Report all claims to your dealer or local Heta representative, who in turn will contact Heta
to solve the claim. To file a claim please provide date of installation, picture of the silver data sticker,
model and a description of the issue and pictures.
The guarantee does not cover:
Wearing parts / fragile parts such as:
•
Vermiculite elements in the combustion chamber.
• Glass
• Seals
• The cast bottom or shaking grate
•
Surface or paint deteriorations due to excessive humidity, salinity or other aggressive environment
• Damage caused by improper use
• Transportation costs for warranty repair
•
Assembly / disassembly of warranty repair
•
Any secondary damages of the stove or it’s environments due to negligence of any initial dama-
ges whether this damage is covered or not by the manufacturers guarantee.
Warning
Inadequate installation, unauthorized alteration
to the stove or the use of non-original parts will
void the guarantee.
Summary of Contents for SCAN-LIINE 80 XL
Page 18: ...18 scan line 80 Xl and scan line 80 XlB ...
Page 28: ...28 ...
