background image

GROUNDING INSTRUCTIONS

This heater is for use on 120 volts. The cord has a plug as shown at A in Figure below. An adapter as shown at C is 

available for connecting three-blade grounding-type plugs to two-slot receptacles. The green grounding lug 

extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box. The 

adapter should not be used if a three-slot grounded receptacle is available. 

VENTAMATIC, LTD. LIMITED WARRANTY

This warranty is underwritten by Falco Insurance Company and is extended to the original retail purchaser of this

model or, if this unit is purchased and requires installation by a building contractor, to the original owner of the home. 

No subsequent purchaser of the unit or of a home in which it is installed is entitled to any of the benefits of this warranty.

This product is warranted against defects in materials and workmanship for a period of one (1) year from the date of 

original retail purchase. No other parts or components are warranted. There is no warranty for defects caused by abuse, 

faulty installation or the like.

 

Repairs or replacement parts supplied under this warranty are warranted only for the period of this warranty; that is, 

one (1) year from the date of the original retail purchase of the unit. In the event of a defect or malfunction, we will 

replace or repair the defective part or component only and return the new or repaired part to you freight prepaid.

 

You must bear all other expenses incurred in obtaining repairs, including labor required for field repair or replacement and 

the cost of shipping the defective part to us. You must also bear the cost of repair to or replacement of any part or 

component and the shipping charges incurred for the repair or replacement and return to you of any part or component 

not covered by this warranty, including parts or components damaged by you. 

The company reserves the right to demand and receive written evidence of the date of purchase before undertaking its 

obligations under this warranty. The right to demand and receive written evidence of date of purchase extends to all 

licensed dealers of Ventamatic, Ltd. products.

 

You should, therefore, retain your sales slip and attach a copy of it to the warranty claim.

To start a warranty claim you must:

 

Contact Ventamatic, Ltd.

 

An RGA (Returned Goods Authorization) form is required for returns to the factory to ensure your return can 

 

be processed efficiently and quickly. Please contact Ventamatic, Ltd. toll-free at 800-433-1626 or via web at 

 

www.MYMAXXAIR.com to obtain an RGA and follow the instructions given.

 

There is no informal dispute settling mechanism available in the event of a controversy involving this warranty. 

Any and all implied warranties which may exist terminate upon the expiration of this warranty one (1) year from the 

date of the original retail purchase. Some states do not allow limitations on how long an implied warranty lasts, so this 

limitation may not apply to you. 

Ventamatic, Ltd. is not liable to you for incidental or consequential damages arising out of defect or malfunction of a 

unit or its installation or out of any alleged breach of this warranty. Some states do not allow the exclusion or limitation of 

incidental or consequential damages, so this limitation may not apply to you. 

This warranty gives you specific legal rights and you may also have other rights which may vary from state to state.

               

 

 

 

 

 

 

 

 

 

 

rev. 04/19

GROUNDING 

PIN

(A)

METAL SCREW

COVER OF GROUNDED

OUTLET BOX

(B)

(C)

ADAPTER

(D)

GROUNDING

MEANS

GROUNDING

PIN

Summary of Contents for H1019

Page 1: ...Name 1 Expansion Bolt M6 70 2 Upper L Bracket 3 Washer 4 Spring Washer 5 Screw Nut M6 6 Screw M6 16 7 Lower L Bracket 8 Main Switch 9 Control Panel 10 Screw M6 8 11 Allen Key 12 Remote Control ACCESSORIES PACK Qty Part Name 2 Upper L Bracket 2 Lower L Bracket 2 Expansion Bolt M6 70 2 Screw M6 16 1 Remote Control 1 Allen Key 4 Screw M6 8 WARNING Use this heater only as described in this manual Any ...

Page 2: ...a desired angle and drive the Screws M6 16 tight The adjustable angle is within 60 degree totally OPERATING INSTRUCTIONS 1 Plug in the unit to a socket Make sure the power supply is same as rated 2 Press Switch on left side of the heater LED indicator light stars flashing showing the heater is on standby Press ON button on control panel or ON button on remote control to switch on the heater To shi...

Page 3: ...or similarly qualified persons in order to avoid a hazard 18 The heater must not be located immediately below a socket outlet 19 When assembling keep clear from any board or flammable material 20 Do not use this heater with a programmer timer or any other device that switches the heater on automatically since a fire risk exists if the heater is covered or positioned incorrectly 21 This appliance i...

Page 4: ...eplacement of any part or component and the shipping charges incurred for the repair or replacement and return to you of any part or component not covered by this warranty including parts or components damaged by you The company reserves the right to demand and receive written evidence of the date of purchase before undertaking its obligations under this warranty The right to demand and receive wr...

Reviews: