Hettich AG, Seestrasse 204a, 8806 Baech, Switzerland
Operator Manual_DancerPlus_EN_rev, 1.1
Page 8
1.7
Safety information
No guarantee claim will be considered by the manufacturer unless all information in these
operating instructions has been adhered to.
The DancerPlus must be structurally stable for operation and the cover must be able to be
opened easily. A sufficient fresh air supply and appropriate exhaust air discharge must be
ensured.
The DancerPlus evaporator has been built in accordance with current state of the art technology and is
operationally reliable. However, danger to the user or third parties may occur if it is not operated by sufficiently
trained personnel, is operated improperly or used for a non-intended purpose.
The following points must be observed:
▪
The operating instructions must be read and observed before the DancerPlus is commissioned
▪
The recognised technical regulations and guidelines for safe and professional work must also be
observed in addition to the operating instructions and binding accident prevention guidelines. The
operating instructions must be supplemented by instructions based on the country of use’s prevailing
national regulations regarding accident prevention and environmental protection
▪
Only connect the DancerPlus to a residual current circuit breaker with a shockproof socket, only use a
power cable that fulfils the regulations and is in flawless condition. Defective or inadequate earthing may
have fatal consequences.
▪
The requirements regarding mains voltage and power consumption must be observed
▪
Condensation may build up if the DancerPlus is moved into the operating area from a cold environment.
In this case, allow the device to acclimatise for 24 hours
▪
Observe the permitted ambient conditions and ensure a sufficient fresh air supply
▪
When the solvents are evaporated, a vacuum is created by the vacuum pump. Therefore, the applicable
safety regulations for the creation and measurement of a vacuum must be observed. The operating
instructions of the utilised vacuum pump must also be observed in this regard
▪
Any interventions on the device may only be carried out by sufficiently qualified personnel. Only use original
parts and accessories. Using components made by other manufacturers may impair the functionality or
safety of the device, as well as the electromagnetic compatibility
▪
No solvent containers or other objects may be placed on the DancerPlus
▪
When cleaning the device, never use abrasive materials and cleaning agents, as these may damage the
surfaces
▪
Never use blades or knives for cleaning
▪
Only use a soft cloth moistened with lukewarm water for cleaning the housing
▪
The sight glass can be cleaned with any regular window cleaning agent
