8
|
HEWI
Panic bar PS160XA/PS111XA
Important information
70
36
15,5
31
95
15,5
22,5
99
70
Center-to-center (BA)
Customer specification
436 to
760 mm
extendable from
761 to
860 mm
extendable from
861 to
1010 mm
extendable from
1011 to
1160 mm
extendable from
1161 to
1300 mm
extendable from
1301 to
1440 mm
extendable from
1441 to
1580 mm
Proper use
HEWI panic bar for doors with panic device according
to DIN EN 1125.
Panic devices enable safe escape through doors with
little effort, without requiring prior knowledge on how
to operate the panic device. Panic devices are used in
public buildings and places used by the public.
A horizontally attached bar enables the door to be easily
opened even in the dark or smoke.
Mounting information
The safety characteristics of this product are essential
for compliance with DIN EN 1125. With the exception of
the changes described in these instructions, no other
modifications whatsoever may be made.
A panic device according to DIN EN 1125 is made up of:
A Panic bar
B Lock system; depending on the application, consis-
ting of:
Lock, locking bars, locking plate, lock recesses, etc.
These installation instructions solely refer to the moun-
ting of the panic bar listed under A.
The separate installation instructions for the lock system
according to B must be carefully read and followed.
The doors must be in a technically perfect condition
when the devices are fitted and the doors must be che-
cked to ensure easy movement.
When mounting the devices on fire doors and smoke
control doors the relevant standards and the door ma-
nufacturer‘s instructions must be read and followed.
Center-to-center (BA)
Customer specification
436 to
760mm
extendable from
761 to
860 mm
extendable from
861 to
1010 mm
extendable from
1011 to
1160 mm
extendable from
1161 to
1300 mm
extendable from
1301 to
1440 mm
extendable from
1441 to
1580 mm
Item numbers
PS160XA1.., PS160XA20, PS111XA1.., PS111XA20
Item numbers
PS160XA3.., PS160XA40, PS111XA3.., PS111XA40
Centre-to-centre measurement
Outer dimension
BKS
