Solution 2
Cause
The downloaded file is corrupt.
Action
1.
Select a new file.
2.
Repeat the URL configuration, specifying the new file.
3.
Try to download the new file in the URL.
Cannot deploy from the UEFI Shell script
Symptom
You attempted to deploy an OS using the UEFI Shell script and you see an error message that the
deployment failed.
Cause
Configuration settings are not correct.
Action
1.
Verify the following.
a.
The Embedded UEFI Shell interface is added to the
UEFI Boot Order
list or the
One-Time Boot
Menu
.
b.
When added to the
UEFI Boot Order
list, the Embedded UEFI Shell interface is the first boot
option in the
UEFI Boot Order
list so that it overrides other boot options to load.
c.
UEFI Shell Script Auto-Start is enabled.
d.
The correct
startup.nsh
script file location in attached media or a network location is specified. If
it is in attached media, the
startup.nsh
script must be either inside the
fs
X
:\
or the
fs
X
:\efi
\boot\
directory.
e.
The
.nsh
script only contains supported commands.
f.
Your system has enough RAM memory to create RAM disks during automated script execution.
g.
Any OS boot loader or diagnostics application launched using the
.nsh script
is supported to
run in UEFI the environment.
h.
If the shell script verification is enabled, ensure the script is enrolled in the Secure Boot database
and that the script starts with the line #!NSH.
2.
Try the deployment again.
Cannot execute Option ROM for one or more devices
Symptom
You cannot execute Option ROM for one or more devices.
Troubleshooting
117
