System Configuration
System Configuration menu options
• BIOS/Platform Configuration (RBSU)
• iLO 5 Configuration Utility
• Other system-specific devices, such as installed PCIe cards, NICs, and Smart Arrays. For example,
Embedded FlexibleLOM Port 1.
BIOS/Platform Configuration (RBSU)
The
BIOS/Platform Configuration (RBSU)
menu contains many of the nested options for accessing
UEFI options, including:
Using the iLO 5 Configuration Utility
iLO 5 Configuration Utility options
You can access the iLO 5 Configuration Utility from the physical system console, or by using an iLO 5
remote console session. The utility has the following options:
•
•
•
•
•
•
•
Network Options
•
MAC Address
(read-only)—Specifies the MAC address of the selected iLO network interface.
•
Network Interface Adapter
—Specifies the iLO network interface adapter to use.
◦
ON
—Uses the iLO Dedicated Network Port.
◦
Shared Network Port
—Uses the Shared Network Port. This option is only available on supported
servers.
◦
OFF
—Disables all network interfaces to iLO.
•
Transceiver Speed Autoselect
(iLO Dedicated Network Port only)—Enables iLO to negotiate the
highest supported link speed and duplex settings when connected to the network.
This option is only available when
Network Interface Adapter
is set to
ON
.
•
Transceiver Speed Manual Setting
(iLO Dedicated Network Port only)—Sets the link speed for the
iLO network interface.
18
System Configuration
