Configuring Server Availability
Server Availability options
• ASR Status
• ASR Timeout
• Wake-On LAN
• POST F1 Prompt
• Power Button Mode
• Automatic Power-On
• Power-On Delay
ASR Status
Use the option to enable or disable ASR (Automatic Server Recovery). When enabled, the system
automatically reboots if the server locks up.
Enabling or disabling ASR
Prerequisites
The System Management driver is loaded.
Procedure
1.
From the
System Utilities
screen, select
System Configuration
>
BIOS/Platform Configuration
(RBSU)
>
Server Availability
>
ASR Status
and press
Enter
.
2.
Select a setting and press
Enter
.
a. Enabled
b. Disabled
3.
Press
F10
.
ASR Timeout
When
ASR Status
is enabled, use this option to set the time to wait before rebooting the server if an
operating system crash or server lockup occurs. When the server has not responded in the selected
amount of time, the server automatically reboots.
Setting the ASR timeout
Prerequisites
ASR Status
is enabled.
Configuring Server Availability
91