![background image](http://html1.mh-extra.com/html/hexagon-mining/360a/360a_technical-reference-manual_2128215017.webp)
© Leica Geosystems
Commercial in Confidence
11
5
Software Installation
The following procedure is used for software upgrades of AP360.
Note:
Contact Hexagon Mining | Devex for the required files.
5.1
Update Accesst Point 360 using debug cable
WARNING:
Do not turn off the unit, or remove the debug cable while the software
upgrade is under way.
The software is installed using the debug cable. Installation files are provided by Hexagon
support and are specific for each installation site.
Procedure Requirements:
A Computer
Debug Cable
Clean USB Key
– to 2 GB
1. Get the latest Linux release image available in the following link:
http://dev.devexmining.com/svn/produto_releases_dip/EmbeddedTemp/ImagensAccessPoint360/AP05_v119
2. Using the computer, extract the provided files and copy into the clean USB Key
3. The files in the USB Key appear as in the graphic below:
4. To star the unit, connect the debug cable to the AP360 and USB Key:
5. Access the AP360 via serial port, this procedure will use the software "Putty".
6. Open the software and select the "Serial" option under "Connection type". Then, enter the
port emulated by USB converter in the field "Serial Line", which in this example is the COM3
Location to connection
of the Debug cable
Summary of Contents for 360A
Page 2: ......
Page 6: ......
Page 9: ...Leica Geosystems Commercial in Confidence 3...
Page 13: ...Leica Geosystems Commercial in Confidence 7 4 2 2 Rear View...