User manual - Machine Automation Solution - V3R003
23 / 102
·
GNSS
Displays the total number of connected satellites. When pressed, it displays a window with details. When
used Novatel models, shows the information on the location's accuracy, which allows more accurately identify
the positioning of the vehicle. For information details, access topic
;
·
Mobile
Indicates connectivity to mobile data networks. For details, access topic
·
Cloud
Indicates the display is online and authenticated on the Hexagon Agriculture services.
·
Wi-Fi
Indicates whether or not the display is connected to a Wi-Fi network. When pressed, it displays details about
the network connection. For configuration details, access topic
.
·
Local
Indicates whether the display is connected to the customer´s local service.
Important
Only the options according to the configurations of each display and according to the
contracted products will be visible.
7.3 Lightbar
The lightbar is displayed at the top of the operation screen and displays the deviation of the vehicle from the guide being
executed. The squares represent the LEDs that light up when the configured offset is reached. Visually they light up right
or left indicating the deviation side. The sensitivity in meters of the 5 center position LEDs are configurable by the operator,
as shown in the
topic.
Figure - Light bar in operation
7.4 Information configuration
Up to three pieces of information may be displayed on the operations screen.
To modify or enter the presented information, proceed as follows:
1.
Click for two seconds on the information you want to change;
2.
A new window will be presented with the possible options as shown in the figure;
3.
Select the information you want to display;
4.
The window is closed and the selected information is presented.
Figure
– Information configuration
Important
If there is no information, just follow the same procedure above, pressing the empty space to
select the information you want to display, as indicated in the center of the figure below. To do
the inverse, simply select the empty information so that it disappears on the screen.
