User manual - Machine Automation Solution - V3R003
44 / 102
Warning
Enter the implement measurements in meters. For measurements smaller than one meter, insert
the value fractionally. For example, given a 60 centimeter measurement, enter 0.60. Before taking
the measurements, ensure the implement is in level ground and in straight position.
For more details on the configuration of each implement, check the related activities:
·
· Sprayer implement configuration, see the topic
Configuring the sprayer implement.
·
· Fertlizer implement configuration, see the topic
Configuring the fertilizer implement
.
·
· Linear actuator implement configuration, see the topic
Configuring the actuator implement
.
10.2 Editing the implement
Important
Feature available only in
Advanced
mode.
To edit an implement, proceed as follows:
1.
Select the
Implement
option in the
Configuration menu
;
2.
Select the implement you wish to edit on the list;
3.
Select the
Edit
option;
4.
Alter the desired fields;
5.
To confirm, select the
Save
option.
Figure - Implement edit
Important
If the implement is already created, some fields may be ready-only.
10.3 Removing the implement
Important
Feature available only in
Advanced
mode.
To remove an implement, proceed as follows:
1.
Select the
Implement
option in the
Settings menu
;
2.
Select the implement you wish to remove;
3.
Select the
Delete
option;
4.
Confirm the operation selecting option
Yes
.
10.4 Testing the implement
To have access to the tests related to an implement, proceed as follows:
1.
Select the
Implement
option in the
Configuration menu
;
2.
Select the implement you wish to test;
