RDS Toolbox (arms only)
H000002007-RDS User Manual
│
Version 5.0.0 (2018-09-17)
│109
F.3.2
ARM SELECTION
RDS Toolbox is not limited to the currently connected arm but can be used to survey any local arm.
RDS Toolbox by default displays the information for the currently connected arm.
Especially for SMART purpose, RDS Toolbox memorizes all the previously connected arms, and can
display information on those Off-line arms.
On the top right of the screen, an arm selection can be done: click on the Arm selection button: the ribbon
shows all the available arms in memory.
Depending on the status of the selected arm, the icon colour changes:
The Arm is connected and ready
The Arm is connected, but a warning is currently displayed (Rest position, error, alert…) about it
or Maintenance connection is in use.
The Arm is Off-line
The selection of Off-line arms can be used only for SMART and Arm status functions, all other
Panels are not accessible.
Once an arm is selected, RDS Toolbox panels will display the information of this arm.
If the serial number of the local arm is not recognized, it is replaced in the list by the type and
size of the arm, as it appears in the Arms selection list.
(
)
