7.2.2014
Mutant Bassdrum assembly tips v1.05
PG4
hexinverter.net electronics, 2014
STEP 4: Test, then put it all together
I recommend testing the module
before putting it all together.
It takes awhile to take everything apart so you
want to correct any mistakes now before finalizing the whole build by putting on knobs and screwing the
PCB stack together. Plug the top PCB into the control PCB for testing but don’t install the screws and
spacers yet. You should be able to test everything with it just loosely assembled.
Once you’re confident everything works properly, assemble the PCB stack with the screws and spacers. Then
install the panel onto the PCB stack and tighten down all the control surface parts! This is what the finished
product looks like…
This screw adjusts the
maximum decay amount
the control/CV input adjust
to. See the USER MANUAL
for more information!
