True Wireless
Earbuds
hey! welcome to your Heyday
TM
true wireless earbuds. let’s get you set up
How to wear earbuds
Take the earbuds out from the charging case.
The left earbud has an “L” and the right earbud has an “R”
marked on it.
Place the left/right earbud in the left/right ear as indicated
in the illustration. Ensure the speakers are pointed upwards
when placing them in your ears.
Included
Charging case
Wireless earbuds
3 Sets of silicon ear tips (S/M/L with M on the earbuds)
USB-C type charging cable
Pairing
Remove the earbuds from the charging case to power on. If the earbuds are not stored inside
the charging case or are turned off, press and hold both earbuds for 1.5 seconds to power on.
Use Bluetooth settings on your phone to pair with HEYDAY EARBUD 04.
The right earbud will start flashing white/red light rapidly while connecting to your phone.
The left earbud will emit a steady white light - pairing successful.
Place the earbuds back in the charging case to power off or press and hold both earbuds for
4 seconds to power off.
Indicators charging case
Left White flashing rapidly – Battery low
1 Steady White – Battery charged for 25%
2 Steady White – Battery charged for 50%
3 Steady White – Battery charged for 75%
All 4 Steady White – Charging complete
LED indicator
Multifunctional
Button
Multifunctional
Button
Mic
Charging LED indicator
Mic
LED indicator
Type C charging port Reset Button
Phone call function
When you receive an incoming call, the left earbud will flash white.
Single press the left or right earbud to answer the incoming call, press the left or right earbud
again to hang up after the call.
Press and hold the left or right earbud for 1.5 seconds to reject the incoming call.
The music will automatically pause when a call comes in and will resume playing after the call
has ended.
Music function
Press the left or right earbud to play or pause the music.
Double press the left earbud to play the previous track.
Double press the right earbud to play the next track.
Note: since the right earbud is set as default, the left earbud cannot be used in mono mode.
Voice assistant function
Press and hold the left or right earbud for 1.5 seconds to enable or disable the voice assistant /
Siri function.
Charging earbuds
Make sure the earbuds are fully charged prior to the first use.
Approximately 1.5 hours are required to fully charge the earbuds.
Charging is complete when red light turns off.
Place the earbuds in their respective slots inside the charging case to start charging them. The
left and right earbuds emit a steady red light while charging. When the earbuds are fully
charged the lights turn white.
Recharging charging case
When the left light on the charging case rapidly flashes white, the battery of the charging case
is on low power and needs to be charged.
Approximately 1.5 hours are required to fully charge the charging case.
Plug the male end of the USB-C type charging cable into the female port of the charging case.
Plug USB end of charging cable into a DC 5V USB power supply.
The lights flash white while charging. Once the charging case is fully charged all 4 lights will
turn a steady white.
Resetting earbuds
Place the earbuds in the charging case and press the reset button of the charging case. After 6
seconds, the earbuds will turn on and off again, indicating the reset.
Troubleshooting and tips
If the earbuds are not working correctly, turn them on/off.
If the earbuds won’t turn on, recharge the battery and try again.
If the earbuds won’t charge, make sure the charging case battery is not empty. “charging case
battery”is fine - omit apostrophe!!
If the charging case won’t charge, make sure the supply is 5V>1A, that it is functioning
properly and not damaged.
If the earbuds make no sound adjust the volume by turning it up.
If the earbuds make no sound or do not show as an available device, make sure they are not
paired to another device. If so, unpair the device and re-pair the desired device.
This device does not have a pairing code. If prompted for one, make sure you are connecting to
the correct device. If you are, then“forget“ the device and re-pair. If you nevertheless receive a
prompt, then enter 0000.
NOTE:
The unit will power off it is not used for more than 5 minutes.
If the Bluetooth connection range is more than 10 meters the earbuds will disconnect with a
prompt sound, indicating that the connection has been lost. If the connection is not
re-established within 2 minutes, the earbuds will turn off automatically.
Need some help?
Can’t get it to pair? Have a question or comment?
call us at: 877-698-4883 or: 877-MyTgtTech online at: TargetTechSupport.com
Safety
Do not use near any water source
Do not modify or repair this device
Do not use in high temperatures or extreme weather
Do not use chemical detergents to clean your device, use a soft dry cloth
Keep 5-10 inches between microphone and mouth when using the phone call function
FCCID: 2AVTM-TT2107 Model: TT2107 Input: 5V Max 1A Made in China
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and (2) This device must accept any interference
received, including interference that may cause undesired operation. Warning: Changes or
modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
●
Reorient or relocate the receiving antenna.
●
Increase the separation between the equipment and
receiver.
●
Connect the equipment to an outlet on a circuit different from that to which the receiver is
connected.
●
Consult the dealer or an experienced radio/TV technician for help.
Target Corp.Mpls.MN,55403 Phone:1-612-304-6073
