Heyner CapsulaProtect 3D, User Manual

GB

English

English

17

18

www.heyner-germany.de

www.heyner-germany.de

1. GROUP I (about 9 to 18 kg Y)

1.1. Using HEYNER® CapsulaProtect 3D as a child car seat

HEYNER® CapsulaProtect 3D

1.2. Adjusting HEYNER® CapsulaProtect 3D to your child's 

size

1.2.1. Preparation 

fig.1a-c

HEYNER® CapsulaProtect 3D

HEYNER® CapsulaProtect 3D

HEYNER® CapsulaProtect 3D

1.2.2. Height and length adjustment of the shoulder belts 

HEYNER® CapsulaProtect 3D

fig.2

fig.2a

fig.2b

fig.2c

fig.2d

Attention

Attention

Important: 

1.3. Installing HEYNER® CapsulaProtect 3D into your car

1.3.1. Conditions for installation 

fig.3

HEYNER® CapsulaProtect 3D

1.3.2. Placing on the vehicle seat 

HEYNER® CapsulaProtect 3D

1.3.3. Installation and fixing 

fig.4

fig.5

fig.6

fig.7

fig.8

   HEYNER® CapsulaProtect 3D

fig.9

fig.10

Attention

1.3.4. Tightening of the cars belt 

fig.11

HEYNER® CapsulaProtect 3D

   (e.g. with one of your knees). Tighten the belt by pulling first 

   the belt part near the belt buckle (X).

• Then firmly pull the cars diagonal belt (U) up towards the 

   roll-up mechanism.

fig.12

fig.12

• Fit the diagonal belt into the previously opened 

   belt clip (GK) and block it by closing and locking the clip 

   with the red belt clip (K).

fig.13

fig.13

• Place the cars diagonal belt (U) on to the red marked belt 

   guide (GR) at the back of the base part.

fig.14

fig.14

• Now flap back the seat part (ST). Slide back the 

   safety bolt (SB) sideward’s into the base holes (BL). Block 

   the safety lock (SR) of the safety bolt at the rear side of 

   the base part (BT).

Attention

Attention: The safety bolt (SB) has to be fixed correctly to both 

seat parts (ST) and base part (BT) after the seat is placed 

into the car for installation. 

Attention

Attention: The HEYNER® CapsulaProtect 3D

HEYNER® CapsulaProtect 3D can only offer 

optimum protection of your child if it is fixed firmly to the 

car´s seat with the car’s three-point-vehicle-belt. The belts 

must not be twisted.

1.4. Travelling with the HEYNER® CapsulaProtect 3D 

1.4. Travelling with the HEYNER® CapsulaProtect 3D 

1.4.1 Securing the child 

1.4.1 Securing the child 

fig. 15

fig. 15

• Release the shoulder belts by pushing the 

   central adjuster (I) and pull the harness belts (G2) 

   towards you.

fig. 16-17

fig. 16-17

• Open the buckle (D) and belts (G), place the 

   harness belts (G2) to the left and right sides.

• Now place your child deep into the seat of your 

   HEYNER® CapsulaProtect 3D

HEYNER® CapsulaProtect 3D, so that his posterior is right 

   down in the seat recess.

fig. 18

fig. 18

• Join the two buckle latches (C) of the harness belt and 

   push them together into the belt buckle (D) until an 

   audible »click« sound is clearly heard.  

• Make sure that the shoulder belts lie firmly against the 

   child's body and are not twisted.

1.4.2 Sitting and Laying position of your child 

1.4.2 Sitting and Laying position of your child 

fig. 19

fig. 19

• The HEYNER® CapsulaProtect 3D

HEYNER® CapsulaProtect 3D is equipped with a 

    5-step-adjustable seating mechanism.

• The adjusting is easy and fast with only one hand.

• Adjust the seat part (ST) by pushing the 

   positioning handle (PG) upwards, to achieve the most 

   comfortable position for your child.

   For long rides orthopedist recommend preferably 

   horizontal position. 

2. Care instructions

fig. 20

HEYNER® CapsulaProtect 3D

fig. 21-22

fig. 23

fig. 24

Attention

Attention

HEYNER® CapsulaProtect 3D

3. Important notices

HEYNER® CapsulaProtect 3D

ECE R44/04

HEYNER® CapsulaProtect 3D

HEYNER MOBIL AUTOMOTIVE GMBH

4. Some final hints:

130.com.ua

Autogood products «130»