COMPUSHIFT II Manual – COMPUSHIFT II Manual
Monitoring & Tuning Your System
–
63
•
•
•
•
•
|||||||
|||||||||
Zoomed-Out View
This view shows you the complete table, end-to-end, with a screen for each gear change.
For most purposes, this view is sufficient for tuning your COMPUSHIFT II.
Button
Function
Press the Left or Right button to move horizontally inside the table. The horizontal
axis represents Throttle Position Percentage.
Since you are in zoomed-out mode, the TPS % intervals will be factors of 10.
This large range is indicated by the numbers at the top right of the screen
(0%-100%).
Watch the right side of the screen to see the TPS % change as you move left
and right.
Also watch the bottom of the screen to see the blinking cursor, indicating
which column you are editing.
Use the "Increase" or "Decrease" button to adjust the value of the pressure.
The pressure is adjustable in 1% intervals. Watch the right side of the screen to
see the PRB % change as you adjust the pressure for a given TPS %.
Also watch the graph to see roughly how the column you are adjusting
compares to the other columns
When you are done editing the speed in as many of the columns as you want to
adjust, press the "Select" button to save your settings.
||| 0-100%
|||| PRB 50%
||||||| TPS 40%
|||||||||
Zoomed-In View
The zoomed-in view shows you every single point, which you can customize for your preferences.
Some clients find the extra detail available in zoomed-in view convenient as they fine-tune the pressure tables,
especially at for low values of TPS%.
