Note: The CMA is designed to cable the enclosure to meet the needs of your specific
configuration.
Figure 9: Cable Management Assembly
10.5
Power Cords
The 4U60 Storage Enclosure contains a power cord for each of the two PSUs.
Note: It is highly recommended that you use the power cords that have been approved for this particular
enclosure. For a list of approved power cords, see:
on page 19.
10.6
HD Mini-SAS Cables
The 4U60 Storage Enclosure contains an HD Mini-SAS cable for each of the two ESMs.
Note: It is highly recommended that you use the HD Mini-SAS cables that have been approved for this
particular enclosure. For a list of approved HD Mini-SAS cables, see:
on page 19.
10.7
Expansion Cables
The 4U60 Storage Enclosure has the option to utilize expansion cables to allow for the connection of up to
four enclosures.
Note: It is highly recommended that you use the Expansion cables that have been approved for this
particular enclosure. For a list of approved expansion cables, see:
on page 19.
37
10
Customer Replaceable Units
User Guide
10.5
Power Cords
